Discover the perfect pair - Let us guide you to your next favourite shoe
How to Fix Peeling Shoe Lining: 2 Easy Methods
How to Fix Peeling Shoe Lining: 2 Easy Methods

How to Fix Peeling Shoe Lining: 2 Easy Methods


In this Article , we will be explaining How to Fix Peeling Shoe Lining in simple and easy steps, you can do it by yourself.

Shoe lining is the material used inside the shoe to provide comfort and support to the foot. It is the innermost layer of the shoe that is in direct contact with the foot. The lining can be made from a variety of materials, including leather, fabric, synthetic materials, or a combination of these.

Purpose of Shoe Lining

The primary purpose of shoe lining is to provide a comfortable and protective layer between the foot and the shoe’s outer material. The lining helps to prevent rubbing or chafing of the foot against the shoe’s interior, which can lead to blisters or other foot problems. It also provides cushioning and support to the foot, reducing the impact of each step on the foot and ankle.

Shoe lining can be found in a variety of styles and designs, depending on the type of shoe and its intended use. Some shoes have a soft, breathable lining that is designed for comfort, while others have a firmer, more structured lining that provides additional support and stability.

In addition to providing comfort and protection, shoe lining can also help to absorb moisture and odor. Many lining materials are designed to wick away sweat and prevent bacterial growth, keeping the foot dry and fresh-smelling. This is especially important for athletic shoes or shoes that will be worn for extended periods.

Why Do Shoe Lining Peel?

Shoe lining can peel due to a variety of reasons, including wear and tear, moisture, heat, and improper care. Here are some of the most common causes of peeling shoe lining:

Wear and Tear:

Over time, the lining of a shoe can start to peel due to normal wear and tear. Constant friction between the foot and the shoe can cause the lining to wear down and eventually come apart.


Exposure to moisture, such as sweat or rain, can cause the lining of a shoe to peel. Moisture can weaken the adhesive used to bond the lining to the shoe’s interior, leading to separation and peeling.


Exposure to high temperatures, such as leaving shoes in a hot car or near a heater, can also cause the lining to peel. The heat can cause the adhesive to break down, causing the lining to come loose from the shoe.

Improper Care:

Improper care of shoes, such as using harsh chemicals or not cleaning them properly, can cause the lining to peel. Chemicals can break down the adhesive, while not cleaning shoes can allow dirt and grime to accumulate, weakening the bond between the lining and the shoe.

Poor Quality:

Shoes made from lower-quality materials or with subpar construction can be more prone to peeling lining. This can be due to weaker adhesives or less durable materials used in the lining.

In some cases, peeling shoe lining can be a sign that the shoes are no longer suitable for use and need to be replaced. However, in many cases, peeling lining can be repaired, allowing the shoes to be used for a more extended period. By addressing the underlying cause of the peeling and using the appropriate repair method, shoes with peeling lining can be salvaged, helping to save money and reduce waste.

How to Fix Peeling Shoe Lining

How to Fix Peeling Shoe Lining

Over time, the lining can begin to peel or come apart, leaving your shoe uncomfortable and unsightly. If your shoe lining is peeling, there are several ways you can fix it. In this article, we will explain the different ways to fix peeling shoe linings, including DIY methods and professional services.

1.    Replacing the Old Shoe Lining with a new one

Replacing the shoe lining can give your shoes a new lease on life, making them more comfortable and hygienic. Here are the steps to replace a shoe lining:

Gather the necessary tools and materials:

You’ll need a pair of scissors, a seam ripper, some fabric glue, a needle and thread, and a new lining material. The lining material can be any lightweight, breathable fabric, such as cotton or silk.

Remove the old lining:

Use a seam ripper to carefully remove the old lining from the shoe, being careful not to damage the shoe or any structural components. Take your time and work slowly to ensure that you don’t cause any unnecessary damage.

Create a pattern:

Once you have removed the old lining, use the pieces as a pattern to create new ones. Trace the pieces onto the new lining material and cut them out, being sure to leave a little extra fabric around the edges to accommodate any necessary adjustments.

Glue the new lining:

Apply fabric glue to the back of the new lining pieces and carefully adhere them to the inside of the shoe. Make sure that the lining is flat and smooth, and that it doesn’t bunch or wrinkle.

Sew the lining in place:

Once the glue has dried, use a needle and thread to sew the lining in place. Start at the toe of the shoe and work your way towards the heel, using tiny, even stitches. Make sure that the stitches are tight enough to keep the lining in place, but not so tight that they damage the shoe’s lining.

Finish the edges:

Once the lining is sewn in place, use scissors to trim any excess fabric from the edges. You may also want to use a fabric fray check to prevent the edges from unraveling.

Allow the shoe to dry:

Finally, allow the shoe to dry completely before wearing it. This will ensure that the glue and thread have had enough time to set and that the new lining is securely in place.

Replacing the lining of a shoe can be a bit time-consuming, but it’s a relatively simple process that can extend the life of your shoes and make them more comfortable to wear. With the right tools and materials, anyone can do it at home.

2.   Use Shoe Glue or Adhesive

Shoe glue or adhesive is one of the easiest and most effective ways to fix peeling shoe linings. It can be purchased from most hardware stores or online. To fix the lining using shoe glue, you will need to:

Step 1: Remove any loose or flaking lining material. Use a soft-bristled brush to clean the area.

Step 2: Apply a small amount of shoe glue to the area where the lining is peeling. Use a toothpick to spread the glue evenly over the surface.

Step 3: Press the lining back into place, holding it for a few minutes until the glue dries.

Step 4: Allow the glue to dry completely for at least 24 hours before wearing the shoes.

Sew the Lining Back in Place

Shoe lining can be sewn, if it is as a whole or in patches coming out of its place. This method also requires dexterity, sewing skills, and the right tools. To fix the lining using sewing, you will need to:

Step 1: Remove any loose or flaking lining material. Use a soft-bristled brush to clean the area.

Step 2: Thread a needle with a matching thread to the lining material. Knot the end of the thread.

Step 3: Carefully sew the lining back into place using small, neat stitches. Be sure to sew through the lining and the shoe material to secure a hold.

Step 4: Once the lining is securely in place, knot the thread and trim any excess.

Things to be Kept in Mind  While Fix Peeling Shoe Lining

Fixing peeling shoe lining can be done at home and one can save you money and breathe new life into your favorite shoes. However, there are some cautions and best practices that one should follow to ensure that he doesn’t damage your shoes and that the repair is done correctly.

Here are some of the key cautions to keep in mind while fixing peeling shoe lining:

Don’t Rush the Process:

It’s important to take your time when fixing a peeling shoe lining. Rushing the process can cause damage to the shoe and may result in an unsatisfactory repair. Work slowly and carefully to ensure that the repair is done properly.

Use the Right Adhesive:

Using the wrong type of adhesive can cause the lining to peel again or may damage the shoe’s fabric. Be sure to choose an adhesive that is designed specifically for shoes and is compatible with the type of lining and shoe material.

Clean the Surface Thoroughly:

Before applying the adhesive, it’s essential to clean the surface of the shoe and the lining thoroughly. Dirt, dust, and debris can prevent the adhesive from adhering properly, causing the lining to peel again. Use a clean, damp cloth to wipe down the surface of the shoe and lining, and allow them to dry completely.

Apply the adhesive evenly:

When applying the adhesive, it’s important to spread it evenly over the surface of the shoe and the lining. Uneven application can cause bubbles or wrinkles, which can affect the appearance of the shoe and the comfort of the lining. Use a brush or a clean cloth to spread the adhesive evenly, and work in small sections to ensure that the glue doesn’t dry before you have a chance to apply the lining.

Press the lining firmly:

Once the adhesive has been applied, carefully press the lining onto the surface of the shoe. Use your fingers or a clean cloth to press the lining firmly into place, working from the center of the shoe outward. Be sure to smooth out any bubbles or wrinkles as you go, and check that the lining is straight and aligned properly.

Allow time to dry:

After the lining has been pressed into place, allow the adhesive to dry completely before wearing the shoe. Rushing the drying process can cause the lining to peel again or may damage the repair. Be sure to follow the manufacturer’s instructions for drying time and avoid wearing the shoes until the adhesive has fully cured.

To Sum it Up

When replacing the lining of your shoes, it’s important to keep in mind some cautions and best practices to ensure that the repair is done correctly. Avoid rushing the process, use the right adhesive, clean the surface thoroughly before applying the adhesive, apply the adhesive evenly, press the lining firmly, and allow time to dry before wearing the shoe.

In conclusion, replacing a shoe lining can be a cost-effective way to revive your favorite shoes and make them more comfortable to wear. With the right tools and techniques, anyone can replace a shoe lining at home. By following these simple steps and taking the necessary precautions, you can ensure that your shoes look great and feel comfortable.

If you have any comments, queries, or concerns please do share them in the comment section.

Leave a Reply

Your email address will not be published. Required fields are marked *